Sanyo VPC-HD1000 - Page 216

199 English
TROUBLESHOOTING
Shooting
A warning tone
(beep-beep-
beep) sounds,
and it is not
possible to
take a picture
using the self-
timer.
The battery
pack is
consumed.
Install a
sufficiently
recharged
battery pack.
Or connect the
AC adaptor
(supplied).
33, 37
When zooming
in or out, the
zoom
movement
stops
momentarily.
The optical
zoom has
moved to the
maximum
magnification
position.
Not a
malfunction.
Release the
zoom switch,
and push it
again.
81
There is noise
in the captured
image.
The ISO
sensitivity
setting is too
high.
Set the ISO
sensitivity to a
lower setting.
111
The \ icon
appears, and
shooting is not
possible.
The camera’s
internal
temperature is
high.
Discontinue
shooting, and
wait for the
camera to cool
down before
using it again.
—
Monitor
No playback
image
appears.
The REC/
PLAY switch is
not set to
PLAY.
Set the REC/
PLAY switch to
PLAY.
46
Problem Cause Action
Reference
page
Downloaded From VideoCamera-Manual.com Manuals