Sanyo VPC-HD1000 - Connecting to a Printer; Pictbridge MODE

English 178
CONNECTING TO A PRINTER
CONNECTING TO A PRINTER
CONNECTING TO A PRINTER
PictBridge MODE
Your camera supports the PictBridge function. By connecting the camera
directly to a PictBridge-enabled printer, the camera’s monitor can be used to
select images and initiate printing (PictBridge printing).
1 Install the card in the camera, open the monitor unit to turn on the
camera, and turn on the printer.
2 Use the supplied docking station to connect the camera to the
printer.
USB CONNECTION
CANCEL
PRINTER
COMPUTER
OKCANCEL
Dedicated USB interface cable
i Insert the plug with the [n] mark facing
up.
To USB connector
USB terminal
To AC adaptor
Downloaded From VideoCamera-Manual.com Manuals