Sanyo VPC-HD1000 - File Protect

English 122
NORMAL/PLAYBACK
FILE PROTECT
Prevent accidental erasure of image and audio files.
1 Display the file that you want to protect from accidental erasure, and
display the NORMAL Mode Playback Menu (page 49).
2 Select “PROTECT” and press the
SET button.
h “LOCK” appears.
h If the protect mode has already
been enabled for the file, then
“UNLOCK” appears.
3 Toggle the SET button up or
down to select “LOCK”, and
press the SET button.
h The protect mode is set for the
file.
h The protect mark B indicates
that the file is locked.
CAUTION
i Even if the protect mode is set for certain files, they will be deleted if the
card is reformatted (page 165).
HINT
To select a different image in steps 2 and 3...
i Toggle the SET button to the left or right.
To cancel the protect mode for a file...
i Display the desired file and repeat steps 1 to 3. The protect mark B will
disappear and the protect mode is canceled.
PROTECT
LOCK
EXIT
OK
Downloaded From VideoCamera-Manual.com Manuals