Sanyo Xacti VPC-C1 User Manual

161
English
Con-
necting
to a TV
No image or
sound.
The digital camera is
not correctly
connected to the TV.
Follow the
instructions to make
the connection
correctly.
130
The TV input is not
set correctly.
Set the input on the
TV to “VIDEO”.
The TV system
setting is not correct.
Set to the correct TV
system.
118
There is no
sound.
The volume setting
on the camera is too
low.
Select the volume
icon Z and adjust
the volume.
71
The edge of the
image is cut off.
This is a
characteristic of the
TV.
Not a malfunction.
129
Image
editing
You cannot edit
or rotate an
image.
The protect mode is
set.
Cancel the protect
mode. 73
Misc.
The “NO
CARD”
message
appears.
No card is inserted. Turn off the power
and insert a card.
36
The
“PROTECTED”
message
appears and
the data cannot
be erased.
You have attempted
to erase data that is
protected from
accidental erasure.
Set the protect
setting for the data to
OFF.
73
The audio
guide does not
sound.
The audio guide
setting is set to
“OFF”.
Set the audio guide
setting to “ON”.
107,
109
Problem Cause Action
Refer-
ence
page
TROUBLESHOOTING
      !"#

Sanyo Xacti VPC-C1 Specifications

General

Brand	Sanyo
Model	Xacti VPC-C1
Category	Camcorder
Language	English