Sanyo Xacti VPC-C1 User Manual

English
162
DOCKING STATION
Problem Cause Action
Refer-
ence
page
Remote
control
unit
The remote
control unit
does not
seem to
work.
The remote control
unit is aimed at the TV
(not at the docking
station).
Aim the remote
control unit at the
remote control sensor
on the docking station
(within a range of
about 30 degrees
horizontally from the
docking station).
132 −
136
Something is
obstructing the space
between the remote
control unit and the
remote control sensor
on the docking station.
Remove or move the
obstructing object.
The remote control
unit battery is
consumed.
Replace with a new
battery.
The remote control
unit battery is not
correctly inserted.
Take care that the (+)
and (–) poles are
correctly oriented.
The remote control
unit is too far from the
remote control sensor
on the docking station.
Operate the remote
control unit from a
position up to 7
meters from the
docking station.
The remote control
codes for the remote
control unit and the
docking station are
different.
Change the remote
control code.
136
 $     !"#

Sanyo Xacti VPC-C1 Specifications

General

Brand	Sanyo
Model	Xacti VPC-C1
Category	Camcorder
Language	English