145 English
TV OUTPUT SETTING
3 Select the desired setting, and press the SET button.
h The screen to change the parameter for the selected setting appears.
<If “TV SYSTEM” is selected>
NTSC: Outputs NTSC video signals.
PAL: Outputs PAL video signals.
<If “TV TYPE” is selected>
4:3: Use this setting when a TV having an aspect ratio of 4:3 is
connected.
16:9: Use this setting when a TV having an aspect ratio of 16:9 is
connected.
<If “COMPONENT/HDMI” is selected>
720p: The output signal is set to 720p.
480p: The output signal is set to 480p.
4 Toggle the SET button up or down to select the desired parameter.
5 Press the SET button.
6 Press the MENU button.
h This completes the TV output setting.
To Next Page
Loading...
