Sanyo Xacti VPC-HD2 - Page 197

183 English
COMMONLY ASKED QUESTIONS
Misc
Why can’t the
camera be
operated?
A temporary
internal circuitry
problem may be
the cause.
Remove the AC
adaptor and the
battery pack from
the camera, wait a
few minutes, then
reinstall the battery
pack and try again.
A problem such
as inability to
record or play
back occurs.
The card contains
files that were
saved using a
device other than
this camera.
After saving your
files to a different
medium, format the
card.
Can I use my
camera abroad?
— When the camera is
connected to a TV,
you can switch the
camera’s video
output to NTSC or
PAL. If you have
questions about
using the AC
adaptor and power
cord abroad, please
consult with a dealer
near you for advice.
Why does the
“System error”
message appear?
A problem has
occurred within
the camera or
card.
Check the following
items:
1 Remove the
card and then
install it again.
2 Remove the
battery pack and
then install it
again.
3 Install a different
card.
If “System error” still
appears after
performing the
above steps, then
take the camera to
the dealer for
service.
Question Answer Action