89 English
RECORDING MENU 2
Focus range setting
How to use the manual focus
1 Select -, and press the SET
button.
h The focus distance adjustment
bar appears.
2 Toggle the SET button to the left
or right to adjust the focus
distance, and press the SET
button.
h The focus distance is set, and
you are returned to the
Recording Screen.
HINT
About the focus range
i The focus distance indication shows the distance between the center of
the lens and the subject.
i In some cases there may be a slight variance between the distance
(numerical figure) you set in the manual focus mode and the actual
distance.
About zoom movement when using the manual focus
i If the focus distance is set to 1.5 m (4.92 ft.) or less, the zoom changes to
the largest setting that is suitable for that focus distance.
i When the focus distance is set to 1.5 m (4.92 ft.) or less, the zoom will
function only within the range at which the image is focused.
About the super macro mode
i When the focus range is set to super macro +, the zoom is temporarily
set to the wide end.
i By assigning an operation shortcut to the SET button (pages 122 and
126), you can change the focus range setting from the Recording Screen.
HD-SHQ
664 00:09:24
664 00:09:24
To Next Page
Loading...
