etc.
Item Description
Enable QoS Check “Enable QoS” to enable QoS function for the WAN port. You
also can uncheck “Enable QoS” to disable QoS function for the WAN
port.
Manual Uplink Speed Set the uplink speed by manual to assign the download or upload
bandwidth by the unit of Kbps.
Manual Downlink Speed Set the downlink speed by manual to assign the download or upload
bandwidth by the unit of Kbps.
Mode Select Guaranteed minimum bandwidth or Restricted maximum
bandwidth
MAC Address Set MAC Address if the address type is by MAC Address
Uplink Bandwidth
Percentage
LAN device bandwidth of uplink bandwidth
Download Bandwidth
Percentage
LAN device bandwidth of download bandwidth
Add Add the setting data
Delete Selected & Delete
All
Click Delete Selected will delete the selected item. Click Delete All
will delete all items in this table.
To Next Page
Loading...
