Item Description
Forwarding Rule
Bridge or NAT mode
Tag
Add VLAN tag to packet
VID
Set VLAN ID（1~4096）
Priority
It indicates the frame priority level. Values are from 0 (best effort) to
7 (highest); 1 represents the lowest priority
CIF
Enable or Disable CIF
5.6 System
This section including Wake on LAN, Change Username/Password, Upgrade Firmware,
Profiles Save, Remote Management, Time Zone, UPnP, Route Setup, VPN
Passthrough, and Wan Type Auto Detection. It is easy and helpful for users making more
detailed settings.
5.6.3 Wake on Lan
To Next Page
Loading...
