Need help?Do you have a question about the Sarabec Loop System LA240 and is the answer not in the manual?
General| Model | LA240 |
|---|---|
| Audio Input | Microphone, Line |
| Output | Loop Output |
| Signal-to-Noise Ratio | >70 dB |
| Total Harmonic Distortion | <1% |
| Weight | 1.5 kg |
| Type | Induction Loop System |
| Power Supply | 230V AC |
| Frequency Response | 100Hz - 5kHz |
| Frequency Range | 100Hz - 5kHz |
Explains the LA240 Loop System's purpose for hearing aid users to listen to TV/Audio.
Outlines the sequential steps for setting up the Loop System, from checking contents to adjusting volume.
Provides essential safety advice, including handling, environment, and user serviceability.
Details UK-specific mains connection safety, including fuse requirements and wire colour coding.
Details the front and rear views of the LA240 amplifier, identifying key controls and connections.
Covers supplied items, amplifier placement, and loop cable/pad setup for optimal listening.
Explains how to connect loop cables, audio sources (digital/analogue), and microphones to the amplifier.
Details how to power on the amplifier, select sources, and adjust volume/tone.
Explains the function of Volume, Tone, Loop Level Indicator, and Source Selection buttons.
Provides solutions for common problems like no sound, low sound, distorted sound, and background noise.
Lists detailed technical specifications for power, controls, connections, and outputs.
To Next Page
