Sargent and Greenleaf AxisBlu User Manual

AxisBlu™ Pairing Instructions
GENERAL NOTES
• YouwillneedtonavigatetotheGoogleplayortheItunesAppstoretodownloadtheAxisBlu™application.
• ThedevicewillrequireBluetoothversion4.2orhigher.
• Whenpairingthedevice,youwillneedtoknowyourpairingcode.PairingcodecanbefoundonthebackoftheBluetoothmoduleandinthesuppliedenvelope.
• THE PAIRING CODE SHOULD BE RETAINED IN AN ACCESSIBLE LOCATION IN THE EVENT OF A MODULE RESET, OR PAIRING OF NEW DEVICE.
• AxisBlu™willsupport1primaryphoneand4additionalphones.TheprimaryphonewillbetheinitialphoneconnectedtotheBluetoothmodule.
• TheBluetoothmodulewillleaveits“whitelist”openforpairinguntiltheprimarymobiledevicehasbeenconnected.Aftertheinitialpairing,the“whitelist”willnotbe
openagainuntiltheuserselectstheADDPHONEoptioninthemobileapp.
Sargent & Greenleaf S.A.
9, Chemin du Croset
1024 Ecublens, Switzerland
Phone: +41-21 694 34 00
Fax: +41-21 694 34 09
Document630-945
Revised10/22/2018
Sargent & Greenleaf, Inc.
One Security Drive
Nicholasville, KY 40356 USA
Phone: (800)-826-7652
Fax: (800)-634-4843
Copyright
©
2018, Sargent & Greenleaf, Inc.
IOS PAIRING
1 NavigatetotheAxisBlu™Icon andclicktostartuptheapplication.Thedefaultstartupwillshowthedeviceisnotconnected.
2 Inthebottomrightcornerclickontheicon.Thiswillopentheapplicationoptions.
3 Youwillseethreeselections: 
 Reconnect - Connecttodevice
 Instructions - Operatinginstructions
 AddPhone - Addadditonalphones
4 ClickontheReconnectIcon.
5 ClickthenameofyourAxisBlu™devicetoconnect.
6 Thesystemwillaskforthepairingcode.ThepairingcodeislocatedonthebackoftheBluetoothmoduleorinthecoinenvelope.Enterthe6
digitpairingcodefoundonthelabel.
7 Oncepairingiscompleted,usetheCONNECTINGsectiontoconnectthedevicetothelock.
ANDROID PAIRING
1 NavigatetotheAxisBlu™Icon andclicktostartuptheapplication.Thedefaultstartupwillshowthedeviceisnotconnected.
2 Inthebottomrightcornerclickontheicon.Thiswillopentheapplicationoptions.
3 Youwillseethreeselections: 
 Reconnect - Connecttodevice
 Instructions - Operatinginstructions
 AddPhone - Addadditonalphones
4 ClickontheReconnectIconandclickonBluetoothSettings.
5 ClickthenameofyourAxisBlu™devicetoconnectunder“AVAILABLEDEVICES.”
6 Thesystemwillaskforthepairingcode.ThepairingcodeislocatedonthebackoftheBluetoothmoduleorinthecoinenvelope.Enterthe6
digitpairingcodefoundonthelabel.
7 Oncepairngiscompleted,usetheCONNECTINGsectiontoconnectthedevicetothelock.

Sargent and Greenleaf AxisBlu Specifications

General

Brand	Sargent and Greenleaf
Model	AxisBlu
Category	Locks
Language	English

Summary

AxisBlu™ Pairing Instructions

General Notes for Pairing

General notes regarding AxisBlu™ application, Bluetooth version, and pairing code location.

Android Pairing Procedure

Step-by-step guide for pairing an Android device with the AxisBlu™ Bluetooth module.

iOS Pairing Procedure

Step-by-step guide for pairing an iOS device with the AxisBlu™ Bluetooth module.

AxisBlu™ Connection and Testing

Connecting to AxisBlu™ Lock

Instructions for connecting the AxisBlu™ device to the lock via the application.

Adding a New Phone

Process for adding an additional phone to an already paired AxisBlu™ device.

Lock Testing Procedure

Steps to test lock functionality and verify secure connection status.

App Communication Status

Explanation of different status indicators in the AxisBlu™ application.

Special Scenarios for AxisBlu™

Lost or New Telephone Connection

Procedure to reset the Bluetooth module and connect a new phone using a backup battery.

Lost/New Telephone Keypad Reset

Instructions for resetting the Bluetooth module via the keypad for lost/new phone scenarios.

Basic Operating Instructions AX26

Introduction and General Notes

Overview of S&G electronic safe locks and general operating guidelines.

Opening the Lock

Instructions on how to open the lock using a 6-digit code and the SEND button.

Resetting Management Reset Code (MRC)

Procedure to reset the lock's factory programmed management reset code.

Changing Lock Codes

Instructions for changing master codes, user codes, and supervisor codes.

Deleting User Codes

Steps to remove a user code from the lock's memory.