Sargon Prospector - Scale Directions 1

2.
Scale Directions
While in
the Setup
Mode,
press
NEXT
untilthe
DRO
displays the
following
(see
Figure 11):
Figure 11:
Scale
Directions
Press
SET to toggle between
positive
and
negative
scale directions. When
the
appropriate
scale
directions are displayed,
press
A/l
to exit to
Normal Mode
or
press
NEXT
to advance to the
next
Setup Screen.
The
last
displayed
directions
will
be saved
automatically.
Note:
Directions must
be correct
for
angle
functions
to operate
properly.
Each
axis
is
set
independently.
15