Sartorius 1601 MP 8 - Balance Assembly and Mode Switch; Leveling the Balance

5
Balance competently assembled
Insert the operating mode switch
(3)
such that
“TA” is across from marker.
Operating mode switch (3)
1.
Stand-by/ON.
“ “ - all components subject to wear are
switched off (stand-by operation)
“ | “ - after the autocheck, balance is instantly
ready to operate..
Leveling
Level the balance using leveling screws
(5)
and
level indicator
(9)
(On model 1612 MP8, the level
indicator is to right of the pan).
2.
Rang switching
— on model 1612 MP8 only: —
macro range (160 g/0,1 mg) in pos. “| “ “160 g”.