17
Balance/Scale Operating Menu (Overview)
o
Factory setting
√ User setting
Menu 1. Balance/ 1.1. Adapt filter 1.1.1 Minimum vibration
scale functions 1.1.2
o
Normal vibration
1.1.3 Strong vibration
1.1.4 Extreme vibration
1.3. Stability range 1.3.1 1/4 digit
1.3.2 1/2 digit
1.3.3 1 digit
1.3.4
o
2 digits
1.3.5 4 digits
1.4. Weight unit for 1.4.1
o
Grams
calibration weight** 1.4.2 Kilograms
1.4.3 Pounds
1.6. Auto zero 1.6.1
o
On
1.6.2 Off
1.7. Weight unit 1 See “Toggle between Weight Units”
1.8. Display accuracy 1* 1.8.1
o
Standard resolution
1.8.3 High resolution
2. Application 2.1. Program selection see the desired application program
programs description
3. Application 3.1. Weight unit 2 see “Toggle between Weight Units”
parameters
3.2. Display accuracy 2* 3.2.1
o
Standard resolution
3.2.3 High resolution
3.3. Reference qty or % see the desired application program
description
5. through 7. applies only if an interface is installed; see the corresponding instructions
8. Extra functions 8.1. Menu 8.1.1
o
Parameter settings alterable
8.1.2 Parameter settings read only
8.2. External switch 8.2.3 applicable only if an interface
function is installed; see the corres-
ponding instructions
8.3. Power-on mode 8.3.1 Off/on
8.3.2
o
Stand-by/on
9. Reset menu 9.–1Factory settings 9.– 1 Reset
9.– 2
o
Do not reset
* = Gold scales only ** = Basic
lite
balances only
Menu level 1
Menu level 2
Menu level 3
Factory setting
Menu level 4
To Next Page
Loading...
