8
Application Programs
Counting
Purpose
With the Counting program you can determine
the number of parts that each have approximately
equal weight.
Available Features
– Store the current weight value to have it loaded
as the preset reference sample quantity next time
you initialize the Counting application
– The reference sample quantity can be changed
in the operating menu:
See “Configuring the Balance/Scale”
– The average piece weight is automatically
output via the optional data interface port after
initialization, if the menu code for “Printout
with data ID codes” is set
– Press v to toggle the display between piece
count and weight
Factory Settings
Reference sample quantity: 10 (menu code 3. 3. 2)
Preparation
§ Configure the Counting application
in the operating menu:
See “Configuring the Balance/Scale”
Menu code 2. 1. 4 Counting
§ Reference sample quantity::
Menu code 3. 3. 1 5 pcs
Menu code 3. 3. 2 10 pcs
Menu code 3. 3. 3 20 pcs
Menu code 3. 3. 4 50 pcs
Menu code 3. 3. 5 100 pcs
See also “Configuring the Balance/Scale”
To Next Page
Loading...
Need help?
General