15
Basic Weighing Function
Purpose
The basic weighing function is always
accessible and can be used alone or in
combination with an application program
(counting, weighing in percent, etc.).
Features
– Taring the balance/scale
You can tare the balance/scale within the
entire weighing range.
– Assigning IDs to weights (as needed)
– Printing weights
Using Verified Balances/Scales as Legal
Measuring Instruments in the EU*:
The type-approval certificate for verification
applies only to non-automatic weighing
instruments; for operation with or without
auxiliary measuring devices, you must
comply with the regulations of your country
applicable to the place of installation of
your balance/scale.
● Before using the balance/scale as a legal
measuring instrument, calibrate and adjust it
at the place of use using the built-in motor-
ized calibration and adjustment weight (span
adjustment device): see the “Calibration/
Adjustment" section in this chapter
$ The temperature range (°C) indicated on
the verification label may not be exceeded
during operation
Example:
BD BL 200
K +10 … +30 °C
* including the Signatories of the Agreement
on the European Economic Area
To Next Page
Loading...
Need help?
General
