17
Under-Balance/Scale Weighing
A port for a under-balance/scale weighing
hanger is located on the bottom of the bal-
ance/scale. You can order the hanger direct-
ly from Sartorius for balances/scales with a
weighing capacity over 12 kg
(see “Accessories").
● Open cover plate on the bottom
of the balance/scale.
● Using the built-in hook (1): Attach the
sample (e.g., using a suspension wire) to
the hook
$ Bore hole (2): Carefully fasten the
special hook, or order a hook directly from
Sartorius.
$ If necessary, install a shield for protection
against drafts
Important Note Concerning Verified
Balances/Scales Approved for Use as Legal
Measuring Instruments in the EU*:
The under-balance/scale weighing port
may not be opened or used when an
approved balance/scale is being operated
as a legal measuring instrument.
* including the Signatories of the Agreement
on the European Economic Area
2
1
To Next Page
Loading...
Need help?
General
