Menu 1 through 3 see previous page
5 Data interface 5 1 Baud rate 511 150 baud
512 300 baud
513 600 baud
514 o 1,200 baud
515 2,400 baud
516 4,800 baud
517 9,600 baud
518 19,200 baud
5 2 Parity 521 Mark
522 Space
523 o Odd
524 Even
5 3 No. of stop bits 531 o 1 stop bit
532 2 stop bits
5 4 Handshake mode 541 Software
542 o Hardware,
2 char. after CTS
543 Hardware,
1 char. after CTS
6 Print for 6 1 Manual/auto print 611 Manual without stability
weighing mode with p key
612 o Manual at stability
with p key
613 Manual at stability
with p key
614 Automatic without stability
615 Automatic at stability
616 Automatic when
load changed
1
)
6 2 Stop automatic 621 Manual (p key)
printing 622 o Not stoppable
6 3 Time-dependent 631 o 1 display cycle
autom. printing 632 2 display cycles
6 4 Tare the balance/scale 641 o Off
after ind. printout 642 On
7 through 9 see next page
1
) = Auto print when load change is > 10 d and stability is reached: no printout until residual difference
in load value is < 5 d; not available in CP…-ACE models
28
M
enu level 1
M
enu level 2
M
enu level 3
Factory setting
M
enu item
To Next Page
Loading...
