Generating a Printout
Purpose
You can generate a printout of weights
as well as other measured values and
identification codes for documentation
purposes. You can format the printout
to meet individual requirements.
Features
Printouts generated automatically or
manually (at the press of a key): weight
or calculated value is output.
Line format: Each value printed
with up to 6 preceding characters for
identification
Print application parameters:
Printout of initialization values before
printing measurement results.
ISO/GLP-compliant printout:
Printout of ambient characteristics.
Printouts generated automatically
or by pressing p, dependent on or
independent of stability
49
You can have the following values output
automatically when using the application
programs if menu code 7 1 2 is configured
(printout with data ID codes):
– Net-total: Component or total weight
– Counting:
Reference sample quantity (nRef)
Reference weight for one piece (average
piece weight; wRef)
– Weighing in percent:
Reference percentage (pRef)
Reference weight (Wxx%)
– Animal weighing/averaging:
Number of subweighing operations (mDef)
Calculated average (x-Net)
To Next Page
Loading...
