Care and Maintenance
Service
Regular servicing by a Sartorius
technician will extend the service life
of your balance/scale and ensure its
continued weighing accuracy. Sartorius
can offer you service contracts, with
your choice of regular maintenance inter-
vals ranging from 1 month to 2 years.
The optimum maintenance interval
depends on the operating conditions
at the place of installation and on
the individual tolerance requirements.
Repairs
Repair work must be performed by
trained service technicians. Any attempt
by untrained persons to perform repairs
may lead to hazards for the user.
65
Cleaning
!Unplug the AC adapter from the wall outlet
(mains supply). If you have an interface
cable connected to the balance/scale port,
unplug it from the port.
!Make sure that no liquid enters the
balance/scale housing
!Do not use any aggressive cleaning agents
(solvents or similar agents)
§ Clean the balance/scale using a piece
of cloth which has been wet with a mild
detergent (soap)
§ After cleaning, wipe down the balance/scale
with a soft, dry cloth
To Next Page
Loading...
Need help?
General
