Overview
Specifications
Competence Series/CP Series
Model CP225D CP324S CP224S CP124S CP64
Weighing capacity g 40/80/220 320 220 120 64
Readability mg 0.01/0.01/0.1 0.1 0.1 0.1 0.1
Tare range (subtractive) g –220 –320 –220 –120 –64
Repeatability (std. deviation) ≤±mg 0.02/0.05/0.1 0.2 0.1 0.1 0.1
Linearity ≤±mg 0.03/0.1/0.2 0.3 0.2 0.2 0.2
Response time (average) s ≤ 12/3 ≤ 3 ≤ 2 ≤ 2 ≤ 2
Operating temperature range °C +10.… +30 °C (50° to 86° F)
Allowable ambient
operating temperature °C +5.… +40 °C (41°F to 104°F)
Sensitivity drift within
+10… +30 °C ≤±/K 1 ·10
–6
External calibration weight g 200 (E2) 200 + 200 (E2) 100 (E2) 50 (E2)
(of at least accuracy class…) 100 (E2)
Net weight, approx. kg 7.6 6.5 6.5 6.5 6.5
Pan size (inner diameter)* mm 80 ‡
Pan surface* cm
2
64
Weighing chamber height
(from pan to cover) mm 232
Dimensions (WƒDƒH) mm 213ƒ342ƒ340
Electronics box (WƒDƒH) mm 134ƒ51ƒ155
AC power source/ V~ AC adapter, 230 V or 115 V, +15%…–20%
Power requirements (protection rating IP20)
Frequency Hz 48 – 60
Power consumption (average) VA maximum 16; typical 8
Approx. hours of operation
with the YRB08Z
rechargeable battery pack h 20 22 22 22 22
Selectable weight units Grams, carats, pounds, ounces, Troy ounces, Hong Kong taels,
Singapore taels, Taiwanese taels, grains, pennyweights, milligrams,
parts per pound, Chinese taels, mommes, Austrian carats, tola,
baht and mesghal
Built-in interface RS-232/V24-V28
Format: 7-bit ASCII, 1 start bit, 1 or 2 stop bits
Parity: Mark, odd, even or space
Transmission rates: 150 to 19,200 baud
Handshake mode: Software or hardware
* Three-sided weighing pan: ‡ = Diameter of inner circle.
The cross-hatched section can be fully utilized.
68
To Next Page
Loading...
