Sartorius CP225D User Manual

6
– Set up the balance/scale on a stable,
even surface
– Avoid placing the balance/scale in close
proximity to a heater or otherwise exposing
the balance/scale to heat or direct sunlight
– Protect the balance/scale from drafts that
come from open windows or doors
– Avoid exposing the balance/scale to extreme
vibrations during weighing
– Protect the balance/scale from aggressive
chemical vapors
– Do not expose the balance/scale to extreme
moisture over long periods
– Level the balance/scale at the place
of installation
Conditioning the Balance/Scale:
Moisture in the air can condense on the
surfaces of a cold balance/scale whenever it
is brought into a substantially warmer place.
If you transfer the balance/scale to a
warmer area, make sure to condition it for
about 2 hours at room temperature, leaving
it unplugged from AC power.
Seal on Balances/Scales Verified for Use in
Legal Metrology in the EU*:
EU legislation requires that a control seal
be affixed to verified balances/scales of
accuracy class K. The control seal consists
of a sticker with the “Sartorius" logo.
This seal will be irreparably damaged if you
attempt to remove it. If the seal is broken,
the validity of verification will become
void and you must have your balance/scale
re-verified.
* Including the Signatories of the Agreement
on the European Economic Area
Equipment Supplied
The equipment supplied includes the
components listed below:
CP Balances with Readability of ≤ 0.1 mg;
GC Scales
–
Balance/scale with display and control unit
– Electronics box (model CP225D only)
– Draft shield with base plate
– AC adapter
– Weighing pan
– Shield disk
– Dust cover
– Gem tray (GC scales only)
CP Balances with Readability of 1 mg
– Balance with display and control unit
– Draft shield with cover
– AC adapter
– Weighing pan
– Pan support
– Base plate
CP Balances with Readability of
0.01 g/0.1 g, GP Scales
–
Balance/scale with display and control unit
– AC adapter
– Weighing pan
– Pan support (model CP622 only)
– Gem tray (GP scales only)
CP34001S, CP34001P, CP16001S,
CP12001S, CP34000
– Balance with display and control unit
– AC adapter
– Weighing pan
Installation Instructions
Your balance/scale is designed to provide
reliable weighing results under normal
ambient conditions. When choosing
a location to set up your balance/scale,
observe the following so that you
will be able to work with added speed
and accuracy:

Sartorius CP225D Specifications

General

Brand	Sartorius
Model	CP225D
Category	Scales
Language	English