Sartorius Cubis MCA125S Series - Disposal; Information on Decontamination; Disposing of Device and Parts; Information on Disposal

104 Operating Instructions Cubis
®
MCA
Disposal
14 Disposal
14.1 Information on Decontamination
The device does not contain any hazardous materials that would necessitate
special disposal actions.
Contaminated samples used during the process are potentially hazardous
materials that could cause biological or chemical hazards.
If the device has come into contact with hazardous substances: Steps must
be taken to ensure proper decontamination and declaration. The operator
isresponsible for adhering to local legislation on the proper declaration
oftransport and disposal and the proper disposal of the device.
WARNING
Risk of injury due to contaminated devices
Devices contaminated with hazardous materials (NBC contamination)
willnot be accepted by Sartorius for repair or disposal.
14.2 Disposing of Device and Parts
14.2.1 Information on Disposal
The device and the device accessories must be disposed of properly
bydisposal facilities.
A lithium cell battery, type CR2032, is installed inside the device.
Batteriesmust be disposed of properly by disposal facilities.
The packaging is made of environmentally friendly materials that can
beused as secondary raw materials.
14.2.2 Disposal
Requirements
The device has been decontaminated.
Procedure
t Dispose of the device. Follow the disposal instructions on our website
(www.sartorius.com).
t Inform the disposal facility that there is a lithium cell battery,
typeCR2032, installed inside the device.
t Dispose of the packaging in accordance with local government
regulations.