88 Operating Instructions Cubis
®
MCA
Operation
8.5.2 Adding an Application to a Task
Applications must be added to a task so that they can run.
Procedure
t Open Task Management.
t Press the [New] button.
y A list of all activated applications is displayed.
t To select an application: Press the desired application.
y The wizard for creating a new task starts.
t Follow the wizard’s instructions in the operating display.
8.6 Adding Weighing and Print Profiles to a Task
To be able to use a weighing or print profile: Add a weighing or print profile
to a task. Weighing and print profiles can be configured in the
Settingsmenu.
Procedure
t Open Task Management.
t Create or edit a task. In order to do so, start the wizard to create or edit
atask and follow the wizard’s instructions in the operating display.
8.7 Preparing Weighings
The device must be prepared before every weighing.
Procedure
t Level the device.
t Zero the device. In order to do so, press the [Zero] button.
t If the device cannot be zeroed: Remove the sample to be weighed
andre-zero the device.
t Calibrate the device.
To Next Page
Loading...
Need help?
General
