5
Display and Keypad:
1 Load plate
2 Leveling feet
3 Level indicator
4* Keypad for numeric input
5* “Clear” key (deletes ID codes and
tare input
6* “Info” key (shows ID codes and tare
input)
7* ID keys (for enteriing ID codes)
8 Data output
9 Gross/net; 2nd unit or 10 x higher
resolution (depending on the
settings)
10 Tare
11 Zero
12 On/off key
13 Display (for a detailed view, see
chapter entitled “Operating Design”
14 Select reference weight
(depending on the application)
15 “Clear” key
16 LEDs (for checkweighing and
classification)
17 Start application
18 Toggle to the application program |
application-specific information
19 Toggle to different weighing
platform
* Combics 1 plus only
General View of the Equipment
Combics 2
Rear view: Model: CW1P | CW1NP | CW2P
Rear view: Model:
CW1S | CW1NS | CW2S | CW1FS | CW1NFS | CW2FS | CH1NE | CH1NG
13
12
11
10
9
8
13
12
19
11
10
9
8
24
23
19
25
24
23
Combics 1|Combics 1 plus
Rear View
20
Second “UNICOM” interface port
for bar code scanner or external
rechargeable battery pack (Combics 2
only) (additional functions optional)
21 RS-232C “COM1” interface port
(standard)
22 Power cord with country-
specific plug
23 Menu access switch
(standard operating mode or
legal metrology mode)
24 Connector for weighing platform
25 Vent valve
1
2
3
2
4
5
6
7
14
15
16
17
18
20
21
22
21
22
To Next Page
Loading...
Need help?
General