Sartorius CW1P - Operating Menu Overview (Parameters)

Operating Menu Overview (Parameters)
= Setting/function available on Combics 1 plus only
= Setting/function available on Combics 2 only
= Setting/function available on Combics 1 plus and Combics 2 only
* Factory setting
Menu
Appl Application Programs
W Basic Weighing Function
3. 5. Minimum Load for Automatic Taring and Automatic Printing
3. 5. 1 * 1 digit
3. 5. 2 2 digits
3. 5. 3 5 digits
3. 5. 4 10 digits
3. 5. 5 20 digits
3. 5. 6 50 digits
3. 5. 7 100 digits
3. 5. 8 200 digits
3. 5. 9 500 digits
3. 5.10 1000 digits
3. 7. Automatic Taring: 1st Weight Tared
3. 7. 1 * Off
3. 7. 2 On
9. 1. Factory Settings for All Application Programs
9. 1. 1 Yes
9. 1. 2 * No
Z Counting
3. 5.
Numeric menu as for Weighing Minimum Load for Automatic Taring and Automatic Printing
3. 6.
Numeric menu as for 3.5 Minimum Load for Initialization
3. 7. Automatic Taring: 1st Weight Tared
3. 7. 1 * Off
3. 7. 2 On
3. 8. Start Application with Most Recent Application Data when Combics is Switched On
3. 8. 1 Automatic (on)
3. 8. 2 * Manual (off)
3. 9. Resolution for Calculation of Reference Value
3. 9. 1 * Display resolution
3. 9. 2 Display resolution + 1 decimal place
3. 9. 3 Display resolution + 2 decimal places
3. 9. 4 Internal resolution
3.11. Storage Parameter
3.11. 1 * At stability
3.11. 2 At increased stability
3.12. Reference Sample Updating
3.12. 1 Off
3.12. 3 * Automatic
3.13. Reference Weighing Instrument
3.13. 1 * No reference instrument selected
3.13. 2 WP1
3.13. 3 WP2
3.25. Tare function
3.25. 1 * The tare value entered is added to the stored tare value
3.25. 2 Overwritable tare value
9. 1. Factory Settings for All Application Programs
9. 1. 1 Yes
9. 1. 2 * No
63
Configuration