Sartorius CW1P - Page 69

Setup
wp-1
1
interm. * Built-in A/D Converter
1. 9. Calibration, Adjustment
1. 9. 1 * Ext. calibration/adjustment; default weight
1. 9. 3 Ext. calibration/adjustment; weight can be selected under menu item 1.18.1
1. 9.10 Press ) -> 2 sec: blocked
1.10. Calibration/adjustment sequence
1.10. 1 Calibration with automatic adjustment
1.10. 2 * Calibration with adjustment triggered manually
1.11. Zero-setting Range
1.11. 1 1 percent/max. cap.
1.11. 2 * 2 percent/max.cap.
1.12. Initial Zero-setting Range
1.12. 2 2 percent/max. cap.
1.12. 3 * 5 percent/max.cap.
1.13. Tare/Zero at Power On
1.13. 1 * On
1.13. 2 Off, load previous tare value
1.13. 3 Only zero at power on
1.15. Calibration Prompt
1.15. 1 * Off
1.15. 2 Calibration prompt “
W" flashes in the display
1.16. External Calibration/Adjustment
1
)
1.16. 1 * Accessible
1.16. 2
2
) Blocked
1.18. Enter Calibration Weight
1.18. 1 External user-defined weight; enter value; e.g.: 10.000 kg)
3. 1. Weight Unit 2
3
)
3. 1. 2 Grams /g
3. 1. 3 Kilograms /kg
3. 1. 4 Carats /ct
1
)
3. 1. 5 Pounds /lb
1
)
3. 1. 6 Ounces /oz
1
)
3. 1. 7 Troy ounces /ozt
1
)
3. 1. 8 Hong Kong taels /tlh
1
)
3. 1. 9 Singapore taels /tls
1
)
3. 1.10 Taiwanese taels /tlt
1
)
3. 1.11 Grains /GN
1
)
3. 1.12 Pennyweights /dwt
1
)
3. 1.13 Milligrams /mg
1
)
3. 1.14 Parts per pound /lb
1
)
3. 1.15 Chinese taels /tlc
1
)
3. 1.16 Mommes /mom
1
)
3. 1.17 Austrian carats /k
1
)
3. 1.18 Tola /tol
1
)
3. 1.19 Baht /bat
1
)
3. 1.20 Mesghal /MS
1
)
3. 1.21 Tons /t
3. 2. Display Accuracy 2
3. 2. 1 * All digits
3. 2. 2 Reduced by 1 decimal place for load change
3. 2. 3 Resolution reduced by 1 scale interval (e.g., from 1 g to 2 g or from 5 g to 10 g)
3. 2. 4 Resolution reduced by 2 scale intervals (e.g., 1 g to 5 g)
3. 2. 5 Reduced by 1 decimal place
1
)
9. 1. Restore Factory Settings for WP1 Numeric Menu
9. 1. 1 Yes
9. 1. 2 * No
off A/D Converter Off
1
) = Not available on instruments verified for use in legal metrology
2
) = Factory setting on instrument verified for use in legal metrology
3
) = Menu depends on weighing instrument model
69