ISBBS, ISDCS Operating Instructions
13
Care and Maintenance
Care and Maintenance
Cleaning Instructions
t Disconnect the weighing platform from the power supply before cleaning.
t If the scale is located in a dry room, wipe the weighing platform with a moist
cloth. Conventional household cleaning agents can be used. Observe the
manufacturer’s information.
3 Never use concentrated acids, alkali solutions, solvents, or pure alcohol to
clean the equipment.
t If the scale is located in a wet room, clean the weighing platform from above
with a weak water jet (max. 60°C).
3 Using a high pressure cleaner to clean the weighing platform is not
permitted.
Cleaning the Weighing Platform Interior
3 t Use compressed air to clean out the interior or use a weak water jet
(max. 60°C). Take special care to ensure that no dirt gets into the gap.
t Condensation may occur in the device due to the temperature difference if
3 the equipment is cleaned with water that is too hot or cold. Condensation
may cause the equipment to malfunction.
To Next Page
Loading...
Need help?
General