Sartorius Master Pro LP3200D - Operating the Balance; Key Functions; Password Levels

SARTORIUS Master
pro
5
4
Max5200 g d= 0.01 g
0.00 g
isoCAL
Max5200 g d= 0.01 g
LP_bedie.EPS
da97
CODE
202122
S-ID
40414243
info menu input
202122
S-ID
202122
info menu input
Operating the Balance
Key Functions
e On/off. Turns the display on/off. The balance remains in the
standby mode.
c Clear function. Used to interrupt/cancel functions; e.g., delete
data from memory, cancel calibration/adjustment functions, etc.
t Tare. Zeros the display.
p Print. The displayed data is output to the printer.
w Toggle. Toggles the readout between weight and calculated
value when using the counting, weighing in percent or calculation
programs; otherwise, toggles between two weight units.
v Function. Starts an application program
ö SETUP. For accessing the SETUP program menu, storing menu
codes, exiting the menu.
[ Calibration/adjustment.
-../ Numeric input (e.g., ID number).
} Decimal point for numeric input.
a Toggle to alphabetic input.
è é Arrow (cursor) keys.
ú õ
Password Levels
There are 3 different levels of password-protected access:
1. The user can assign a password to protect memory data
2. 40414243 is the “dealer password;” this can be given to the user if the
user password is lost
3. 202122 is to be used only by service technicians; when this password is
entered, the data entered using the INPUT mode can be changed and the
q key functions are expanded.
Setting the Language
– When 0.00 g is displayed (depending on balance model), you can select
the language by entering the corresponding number (use the numeric keys).
1 German
2 English (factory setting)
3 English with US date/time format
4 French
5 Italian
– Press ö to save the setting.
Example: French: Press 4 and then press ö to store.