EasyManua.ls Logo

Sartorius MIS1 - Analog;Digital Converter (ADC) Configuration; ADC Configuration Purpose; ADC Configuration Menu Items; Scale Interval (d) Definition

Sartorius MIS1
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Repairing the Midrics Indicator
Indicator
Important:
An isolating transformer must be installed between the indicator
and mains before performing work that entails opening the Midrics
indicator housing.
To open the Midrics indicator, remove the four nuts as shown in the illustration on
the left.
Note: After completing maintenance or repair work, check the seal between the
front panel and the housing body for damage and replace if necessary. If
the Midrics indicator in question has an IP65 protection rating,
a special test procedure is used to check the IP65 protection after the
housing has been closed.
Mi171107.eps
!

Table of Contents

Other manuals for Sartorius MIS1

Related product manuals