Operating Manual EVO1X | LAB1X 39
Technical Data
12.4 Device Dimensions
12.4.1 Model EVO1X
12.4.2 Model LAB1X
12.5 USB Port (PC Connection)
12.5.1 Purpose
This device can be connected to a PC via the USB port.
A virtual serial interface (virtual COM port, VCP) is set up on the PC as a device type
via the USB port. This virtual serial interface is identified and operated by the
application program.
The xBPI and SBI protocols can be transmitted via the virtual serial interface.
To Next Page
Loading...
Need help?
General