Sartorius Proline Plus - Sartorius Pipette Warranty Information; Pipette Parts and Materials Identification

13
14. Pipette Parts and Materials
Parts
1. Tip ejector collar:
Polypropylene (PP)
2. Tip cone holder:
Polyamide (PA)
3. Tip cone complete
5, 10, 20, 25, 50, 100 µl:
Polyvinylidene fluoride (PVDF)
200, 250, 500, 1,000, 2,000,
5,000, 10,000 µl:
Polyphenylene sulfide (PPS)
4. Piston
5, 10, 20 µl:
Stainless steel (SS)
25, 50, 100, 200, 250, 500,
1,000, 2,000, 5,000, 10,000 µl:
Polyphenylene sulfide (PPS)
5. Piston seal
1,000, 2,000, 5,000 µl:
Ethylene propylene diene
monomer (EPDM)
10,000 µl:
Fluoroelastomer (FKM)
6. Calibration nut cover:
Polypropylene (PP)
7. Cap (5 pcs, blue):
Silicone (SI)
Parts
1. Tip cone housing:
Polyamide (PA)
2. Tip ejector bar:
Polyamide (PA)
3. Tip cone complete:
Polyvinylidene fluoride (PVDF)
4. Piston
10 µl:
Stainless steel (SS)
100, 300 µl:
Polyetherimide (PEI)
5. Piston assembly
6. Calibration nut cover:
Polypropylene (PP)
7. Cap (5 pcs, blue):
Silicone (SI)
5, 10, 20, 25, 50, 100 µl 200, 250, 500, 1,000 µl 2,000, 5,000, 10,000 µl
8-channel: 10, 100, 300 µl
12-channel: 10, 100, 300 µl