Sartorius Quintix 64-1S - Using the Balance; Balance Power On;Off and Standby

20
Using the Balance
User Manual Secura
®
, Quintix
®
, Practum
®
5. Using the Balance
5.1 Switching the Balance On/Off (Standby)
0.00
Max 2100 g d
=
0.01 g
y The Leveling screen is displayed first after any model is switched on.
Level the balance if necessary. The actual weighing screen is only displayed after
confirmation.
– When the balance is switched on, the following message appears on the display:
Secura
®
: Level The balance has been leveled (if leveled).
Quintix
®
and Practum
®
: Level Please check leveling.
– If the balance needs to be leveled, a corresponding message appears on the
display (see page 21).
– The balance must be regularly calibrated and adjusted to ensure correct weighing
results (see page 73).
– The display text is given in English as a default. The language can be changed
(see page 29).
t To switch the balance to standby mode, select the Menu key at the bottom left of
the display on the Weighing screen.
ComponentsStatistics
MixingWeighing
y The menu is displayed.
t Select the j button in the Application menu.
y The balance switches to standby mode.
t To switch the balance back on, select j on the display.
The balance starts in the application that was most recently used before it was
switched off.