Sartorius YDK 01 - Page 10

YDK 01LP
You can use the YDK 01 LP density determination kit
with LA/LP balances with a readability of 1mg.
Installing the Density Determination Kit
● Remove the draft shield cover, glass plate,
weighing pan and base from the balance
LA/LP Balances, Except Model LA/LP3200D
● Place the components on the balance
in the following order:
– Compensating ring
– Bar frame
k The wedge-shaped opening at the top of the bar
frame should face the direction from which
the sample holder (pan hanger assembly/glass
plummet) will be placed on the balance
LA3200D, LP3200D Balances
● Place the components on the balance
in the following order:
– Short adapter
– Compensating disk
– Bar frame
k The wedge-shaped opening at the top of the bar
frame should face the direction from which
the sample holder (pan hanger assembly/glass
plummet) will be placed on the balance
LA/LP Balances, Except Model LA/LP3200D
with the YDS01LP Draft Shield
● Place the components on the balance
in the following order:
– Longer adapter
– Bar frame
k The wedge-shaped opening at the top of the bar
frame should face the direction from which
the sample holder (pan hanger assembly/glass
plummet) will be placed on the balance
10