Sartorius YDK 01 - Getting Started

Getting Started
YDK 01, YDK 01-0D
You can use the density determination kit, YDK 01or
YDK 01-0D, with the following balances:
– ME series balances (Genius series)
– BA balances with a readability ≤ 0.1mg
– BP/LA balances with a readability ≤ 0.1mg
– MC balances with a weighing range of 210 g
and up (Micro series)
– RC balances (Research series)
Preparing the Bar Frame
You must mount the adapter before the bar frame can
be placed on the balance.
Please use the adapter that is appropriate for the
balance you are using.
(approx. dimensions)
8 mm Ø, height 41.3 mm – ME balance
with gasket
7 mm Ø, height 16.5 mm – BA, BP*, MC and
RC balances
12 mm Ø, height 25.5 mm – BP**/LA balances
with a readability
≤ 0.1mg
** = BP 210 D, BP 300 S, BP 210 S, BP 160 P,
BP 110 S
** = BP 211D, BP 301S, BP 221S, BP 161P,
BP 121S
8