Need help?Do you have a question about the Sartorius Research RC 210P and is the answer not in the manual?
General| Capacity | 210 g |
|---|---|
| Readability | 0.1 mg |
| Linearity | ±0.2 mg |
| Repeatability | 0.1 mg |
| Weighing pan size | 90 mm |
| Interface | RS-232 |
| Power Supply | 50/60 Hz |
| Operating Temperature | 10°C to 30°C |
Procedure to measure and evaluate measurement consistency.
Procedure to test balance accuracy with off-center loads.
Procedure for calibrating the balance's span internally.
Procedure to test the balance's linear response to load.
Using BPI mode for specific balance adjustments on RC and MC models.
Procedures for coarse and fine adjustment of off-center load errors.
External and internal methods for adjusting balance linearity.
Calibrating the balance span using external weights.
Using the balance's internal adjustment and auto-calibration functions.
Procedures for replacing key electronic components.
Identifying and resolving software and hardware errors.
To Next Page