AE5105/AE5105-3
25
中文
EN
2.3 Description of main components
- This machine mainly consists of the main post, auxiliary post, sliding table, bracket arm, arm lock, bracket arm lock,
mechanical lock, cylinder, power unit, gantry, etc. (See the figure below)
Post: Basic component, carrying sliding table, cylinder and other drive devices;
Sliding table: Lifting component, installed inside the post, sliding up and down;
Bracket arm: Lifting component, installed together with the sliding table, having contact with the support point of the
vehicle to lift the vehicle;
Arm lock: Safety component, locking the bracket arm to prevent it from rotation
Cylinder: Drive component. When the hydraulic station pumps the high pressure oil into the lower chamber of the
cylinder, the piston rod rises and drives the sliding table to rise;
Power unit: Power component. The motor drives the pump to suck oil via the filter strainer and pump high pressure oil
Gantry: Bridging component. The balance wire rope, oil pipe, and safety rope are arranged from the main post to the
auxiliary post by way of the gantry, which also reduces the inward inclination of the two posts.
To Next Page
Loading...