SATA DY03005 - Maintenance

DY03005 Users Manual
-18-
Warning
1.
2.
3.
4.
Set the range switch to OFF position and remove all test leads from the meter.
Shake out any dirt which may exist in the terminals.
Soak a new swab with alcohol.
Work the swab around in each terminal.
Maintenance
Except replacing fuse and battery, never attempt to repair or service the meter unless you are qualified to do so and
have the relevant calibration, performance test, and service instructions.
Store the meter in a dry place when not in use. Don't store it in an environment with intense electromagnetic field.
General Maintenance
Periodically wipe the case with damp cloth and a little mild detergent. Do not use abrasives or solvents.
Dirt or moisture in the terminals can affect readings.
Clean the terminals as follows:
If the meter fails, check and replace ( as needed ) the battery and fuses, and/or review this manual to verify proper use of the meter.