Satel Versa - Glossary of Terms

SATEL VERSA 5
1. Indicate the partition(s) to be armed (press one of the keys: - partition 1; -
partition 2; or - both partitions).
2. Select the arming mode (press one of the keys: - full arming; - day arming;
- night arming).
1.3.4 Arming without delay
When arming the system using one of the above mentioned methods, press and hold down
the arming mode selection key ( , or ) for about 3 seconds. The system will
become armed without delay, i.e. the delayed zones will act as instant ones (without any
exit/entry delay time).
In the day armed mode, the entry delay countdown may run, if the control panel is so
configured by the installer.
1.3.5 Arming with proximity card VERSA-LCDR / VERSA-LCDM-WRL
You can use one of the following methods to arm the system (consult with the installer which
method is to be used):
– bring the card close to the keys and move it away,
– bring the card close to the keys and hold it there for about 3 seconds.
The partitions to which you have access will be armed in full mode.
1.4 Disarming and alarm clearing
1.4.1 Disarming and alarm clearing without partition selection
Enter the code and then press the key. Disarming / alarm clearing will take place in the
partitions to which you have access.
1.4.2 Disarming and alarm clearing in selected partition
1. Indicate partition which is to be disarmed and/or where alarm is to be cleared (press one
of the keys: - partition 1; - partition 2).
2. Press the key. Backlight of the keys will start blinking, which indicates that the code
must be entered.
3. Enter the code.
4. Press the or key.
1.4.3 Disarming and alarm clearing with a proximity card VERSA-LCDR /
VERSA-LCDM-WRL
Bring the card close to the keys and move it away. Disarming / alarm clearing will take place
in the partitions to which you have access.
1.5 Quick control of outputs
Quick activation of output
Press the key to which the controllable output is assigned, and then .
Quick deactivation of output
Press the key to which the controllable output is assigned, and then .