Satimo EME Guard - Technical Characteristics

10 / 37
1.3 TECHNICAL CHARACTERISTICS
➊ Technical characteristics
Frequency range 27 MHz – 40 GHz
Upper detection limit 200 V/m
Lower detection limit 5 V/m
➋ Measurement uncertainty
Axial isotropy +/- 1 dB at 1400 MHz
+/- 2 dB at 2100 MHz
Frequency response 27 MHz - 2.5 GHz : +/- 3 dB
2.5 GHz - 6 GHz : + 6/0 dB
6 GHz - 10 GHz : + 12/+ 6 dB
10 GHz - 20 GHz : + 10/0 dB
20 GHz - 40 GHz : + 8/- 3 dB
➌ Alarm configuration
Reference threshold Configurable by the user
20, 40, 60, 80, 100 or 140 V/m
Alarm mode Instantaneous or 6 min. mean
Visual alarm 4 LEDs
25%, 50%, 75% and 100%
of the reference threshold
Audio alarm Activated (from 5 V/m to 137 V/m)
or de-activated
Vibrator Activated (from 5 V/m to 137 V/m)
or de-activated
Low battery indicator Orange LED
➍ Measurement configuration
Update period for display and alarms 1 sec
Measurement recording Activated or de-activated
Recording capacity 30 000 measurements MAX
Recording period 1-255 sec
Duration of recording
• min.
• max.
1 mn
Duration (in mn) =
30 000 points x recording period (sec)
60
➎ Conditions for use
Temperature, humidity -10 to 50°C, 85% max. humidity
Power supply of battery charger 110 - 240 VAC, 50 - 60 Hz
Battery Lithium-Ion
Battery autonomy > 100 hours
Type of link USB
➏ Mechanical characteristics
Dimensions 172 x 60 x 35 mm (H, L, W)
without belt clip
Weight 320 g
Protection IP 55