ENGLISH - 18
B. Screw 6pcs of M4x20 bolt to x the mounting plate
Insert screws Re-apply sikaex to cover bolts screwed
B-4
B-2
Place the mounting plate on the sikaex and
make 6 holes (2mm) with a power drill
B-3
B-1
Apply sikaex on the holes
C. Apply sikaex between mounting plate and electrical tape
Remove electrical tape and allow to dry
C-4
C-2
Apply sikaex around mounting plate edge
C-3
C-1
Clean away the excess sikaex
Prepare to place the antenna on to the four
upright bolts
To Next Page
Loading...
