SATO CG408 Quick Guide

SATO America, Inc.
10350A Nations Ford Road
Charlotte, NC 28273
Main Phone: (704) 644.1650
Technical Support: (704) 644.1660
Technical Support Fax: (704) 644.1661
E-Mail: satosales@satoamerica.com
techsupport@satoamerica.com
www.satoamerica.com
© Copyright 2010 SATO America, Inc.
All rights reserved.
Reproduction in any manner of all or part of this document is prohibited.
The content of this document may be changed without prior notice.
Great care has been taken in the preparation of this document. If any problems, mistakes, or omissions are found,
please contact your SATO reseller or technical support center.
FCC Statement
The printer complies with the requirements in Part 15 of FCC Rules for a Class B Computing Device. Operating
the printer in a residential area may cause unacceptable interference to radio and TV reception. If the interference
is unacceptable, you can reposition the equipment, which may improve reception.

SATO CG408 Specifications

General

Resolution	203 dpi
Max Print Width	104 mm
Print Method	Thermal Transfer
Max Print Speed	4 inches/sec
Media Roll Diameter	127 mm (5 inches)
Memory	4 MB Flash
Interface	USB, Serial, Ethernet
Media Sensor	Reflective and Transmissive
Media Thickness	0.06 mm - 0.19 mm
Ribbon Length	100 m (328 ft)
Label Thickness Range	0.06 mm - 0.19 mm