SATO TH2 User Manual

RS\Mktg\InstGuides\OOB\Mar11
Help & Service for your SATO Printer 2
Setting up your Printer 3
The Keypad 6
Loading the Label Roll 7
Using the Dispenser 9
Label Formats 11
Printing Labels 13
Charging the Battery 15
Cleaning Procedures 16
THE SATO TH2 RETAIL
LABEL PRINTER
USER GUIDE

SATO TH2 Specifications

General

Print Resolution	203 dpi
Ribbon Type	Wax, wax/resin, resin
Operating Temperature	5°C to 40°C
Print Method	Thermal transfer
Print Speed	Up to 6 ips
Max. Print Length	999 mm
Media Type	synthetic
Media Thickness	0.06 mm to 0.19 mm
Interfaces	USB, Ethernet, Serial
Ribbon Length	300 m
Power Requirements	AC 100-240 V, 50/60 Hz
Operating Humidity	25% to 85% RH, non-condensing

Summary

THE SATO TH2 RETAIL LABEL PRINTER

About your SATO Retail Printer

Assistance for your SATO Printer

Ordering more labels

Setting up your SATO Printer (1)

Setting up your SATO Printer (2)

The Printer Keypad

Loading the Label Roll

Using the Label Dispenser

Label Formats

Printing Labels Process

Optional Battery Installation & Charging

Fitting the Battery

Instructions on how to install the battery into the printer compartment.

Removing the Battery

Procedure for safely removing the battery from the printer.

Charging the Battery

How to connect the AC adapter and charge the printer battery.

Cleaning Procedures