Need help?Do you have a question about the SATO CL4NX RIDF and is the answer not in the manual?
General| Print Method | Thermal Transfer / Direct Thermal |
|---|---|
| Max. Print Width | 4.09 inches (104 mm) |
| Print Resolution | 203 dpi |
| Media Type | Roll, Fan-fold |
| Media Thickness | 0.0024 - 0.01 inches |
| Ribbon Length | 984 feet (300 m) |
| Processor | 32-bit RISC processor |
| Interfaces | USB, RS-232C, Ethernet |
| RFID | Optional |
| Supported Barcode Types | 1D, 2D |
| Power Supply | AC100V to 240V ± 10%, 50/60 Hz |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Humidity | 30 - 80% RH, non-condensing |
| Weight | 33.07 lbs |
Determines the ink side of the ribbon for thermal transfer printing using touch and observation.
Step-by-step instructions for loading a thermal ribbon onto the printer's supply and rewind spindles.
Instructions for safely removing a used thermal ribbon from the printer rewind spindle.
Details the types of media rolls and fan-fold media supported by the printer.
Explains how to adjust the media sensor for accurate I-mark or Gap detection on various media.
Comprehensive steps for loading the media roll into the printer, ensuring correct orientation.
To Next Page
