SATO CT400 - Page 2

Printing Method
Print Resolution
Print Speed
Media Width
Max. Print Width
Min. Print Length
Max. Print Length
Max. Ribbon Size
Dimensions
Weight
Memory:
8 MB SRAM
2 MB Flash ROM
Processor:
32-BIT RISC
Media:
Roll-fed or fan-fold, die-cut or continuous
direct thermal (thermal transfer) labels, synthet-
ics, and tag stock with or without black mark,
gap, or notch.
Max. Caliper: 0.0075" (0.19 mm)
Max. Roll Diameter: 4.4" (110 mm)
Wind: Face-Out
Ribbon:
Max. Roll Diameter: 1.5" (39 mm)
Min. Core Diameter: 0.5" (12.7 mm)
Wind: Face-Out
Sensing:
Adjustable transmissive sensor for gap.
Reflective sensor for black mark. Automatic,
programmable setting of top of form. Label
present sensor - optional with label dispenser.
Ribbon-out sensor
Interface:
• IEEE1284, High-Speed, Bi-directional
• Serial RS232 (up to 57.6k bps)
• Ethernet - 10/100BaseT (internal)
• Wi-Fi - 802.11b (internal)
• USB adapter
Barcode Symbologies:
EElleemmeennttaarryy::
UPC-A, UPC-E, EAN-8, EAN-
13, Code 39, Code 93, Code 128, Codabar,
MSI, Bookland, Industrial 2/5, Interleaved
2/5, Matrix 2/5, Postnet, UCC/EAN 128,
RSS Composite Code
22--DDiimmeennssiioonnaall::
PDF417, Micro PDF417,
Truncated PDF417, Maxicode, Data Matrix,
QR Code
Fonts:
Bitmap - 12 proportional, mono-spaced and
outline fonts (Code table 858). Scalable
Internal CG Triumvirate
®
& CG Times
®
fonts.
Optional Downloaded TrueType
®
fonts, scala-
ble from 8 to 72 points.
Barcode & Font Formatting:
360° rotation of barcodes and text, charac-
ter expansion horizontally and vertically,
sequential numbering, form overlay for high-
speed editing of complex formats.
Graphic Support:
Printing & storage of .PCX, .BMP format,
SATO Hex/binary
Software:
Windows
®
Drivers (Windows
®
95, 98, ME,
NT4.0, 2000, XP)
“Label Gallery Free” - Label Software
Printer Utilities
Electrical Requirements:
115V/220V (± 10%), 50/60 Hz (± 1%)
Agency Certifications: CE, UL, CSA, TÜV
Environmental Requirements:
Operating: 41° to 104°F (5° to 40°C)
15-85% RH, non-condensing
Storage: 0° to 104°F (-20° to 40°C)
Max. 90% RH, non-condensing
EDS: 8kV
Optional Features:
Label Cutter (factory installed), Label
Dispenser (factory installed), Ethernet,
802.11b Wireless, Label Gallery Software,
Rewinder, External Keyboard
SATO America, Inc.
10350-A Nations Ford Road, Charlotte, NC 28273
Phone: (704) 644-1650 Fax: (704) 644-1659
E-mail: satosales@satoamerica.com
www.satoamerica.com
Network I/F
Keyboard
© 2003 SATO America, Inc. All rights reserved. Specifications subject to change without notice. Rev. 8/03
THE
BEST PERFORMING
COMPACT
SPECIFICATIONS
Rewinder
Software
CT400 CT410
Direct Thermal/Thermal Transfer or Direct Thermal only
203 dpi (8 dpmm) 305 dpi (12 dpmm)
6 ips (150 mm/second) 4 ips (100 mm/second)
Max. 4.6” (118 mm) /Min. 1” (25 mm)
4.1” (104 mm)
0.6” (15 mm)
15.7” (400 mm)
4.33" (110 mm) x 325 ft. (100 m) - Face-Out
7.8” W x 9.1” D x 7.1” H
(198 mm W x 230 mm D x 181 mm H)
6.6 lbs (3 kg)