Need help?Do you have a question about the SATO CT400 and is the answer not in the manual?
General| Print Resolution | 203 dpi |
|---|---|
| Print Method | Thermal Transfer/Direct Thermal |
| Max. Print Width | 104 mm (4.09 inches) |
| Media Type | Labels, tags, tickets |
| Media Width | 1 inch (25.4 mm) to 4.6 inches (118 mm) |
| Media Thickness | 0.06 mm - 0.19 mm (0.002 inches - 0.0075 inches) |
| Media Roll Diameter | 5 inches (127 mm) |
| Processor | 32-bit RISC |
| Memory | 8 MB Flash |
| Interfaces | USB, RS232, Ethernet |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Supported Barcode Types | Code 39, Code 128, Interleaved 2 of 5, Postnet, PDF417, Data Matrix, QR Code |
Details unpacking, physical setup, loading ribbon and media, and initial power-up steps for the printer.
Step-by-step instructions for cleaning the print head, platen, and rollers using specific cleaning supplies.
Details the procedure for safely replacing the printer's print head, including necessary tools and precautions.
Details commands for generating various linear bar code symbologies, including structure, parameters, and data requirements.
Explains commands for printer configuration, print mode, type, pitch, sensor, and interface settings.
Provides initial checks and troubleshooting for parallel interface issues, cable connections, and PC configuration.
Guides users through serial interface troubleshooting and interpreting error signals indicated by LEDs and buzzers.
Details specifications for linear bar codes like Codabar, Code 39, UPC/EAN, Code 128, Postnet, and others.
To Next Page
