UNPACKING
Consider the following when unpacking the printer:
• The box should stay upright.
• Lift the printer out of the box carefully.
• Remove the plastic covering from the printer.
• Remove the accessory items from their protective containers.
• If the printer has been stored in a cold environment, allow it to reach room
temperature before applying power.
• Set the printer on a solid flat surface. Inspect the shipping container and
printer for any signs of damage that may have occured during shipping.
In addition to this manual, verify that you have the following materials when
unpacking:
CD-ROM
Power Module
AC Power Cord
Ribbon/Core
Printer
Section 2. Installation and Configuration
Page 2-29001069A SATOCTSeriesPrinters
To Next Page
Loading...
