SATO CL408e User Manual

29 pages

Other manuals for SATO CL408e

Service Manual219 pages

Specifications2 pages

Programming Reference255 pages

Parts List30 pages

Rfid Guide51 pages

Quick Guide23 pages

Manual List3 pages

Questions and Answers:

J
Jessica OrtegaJul 27, 2025
What to do if SATO CL408e Printer beeps with FRAMING ERROR message?
- S
  Stephanie HernandezJul 27, 2025
  If your SATO Printer is beeping and displaying a FRAMING ERROR message when data is sent, it means there's a mismatch in the RS232 data format settings. Here’s what you should do: 1. Check that the DSW1 configuration settings for the RS232 data format match those of your host system. 2. Verify that the baud rate selected by DSW1-5 and DSW1-6 matches the host's baud rate. If they don't, adjust either the printer or the host settings to ensure they match.
S
Stephanie ThomasAug 5, 2025
How to fix SATO CL408e Printer that won’t go On-Line?
- B
  bdeanAug 5, 2025
  If your SATO Printer won’t go On-Line, there are a couple of things you should check: * First, ensure that the power cable is properly connected and the AC Fuse is in good condition. * Second, verify that the Head Latch is completely closed.
C
Catherine BrownAug 14, 2025
Why does my SATO Printer beep and refuse to print?
- J
  Julie WatkinsAug 14, 2025
  If your SATO Printer beeps and refuses to print, it's often due to an incorrect data stream. To troubleshoot, put the printer in Hex Dump mode and print the data being sent to it. Then, carefully check the incoming data stream for any incorrect command usage.

SATO CL408e Specifications

General

Print Resolution	203 dpi
Print Speed	4 inches per second
Print Method	Thermal Transfer / Direct Thermal
Memory	2 MB Flash
Connectivity	RS-232C
Media Thickness	0.0025" - 0.01"
Supported Barcode Types	Code 39, Code 128
Operating Temperature	41°F to 104°F
Storage Temperature	140°F
Print Width	4.1"
Media Type	Roll or Fan-Fold

Summary

Software License Agreement

Copyrights, Trademarks, and Disclaimers

SATO CUPS Driver Overview

Supported SATO Printer Models

Lists the SATO printer models supported by the current driver version.

Printer Properties and Options

Details the various settings and options configurable for SATO printers via the driver.

System Requirements

Driver Setup and Installation

Installing the SATO Driver

Step-by-step guide on how to install the SATO Printer Drivers package.

Uninstalling the SATO Driver

Provides instructions on how to remove the SATO CUPS Driver from the system.

Managing Printers via System Preferences

Adding a New Printer

Step-by-step guide to add a new SATO printer using System Preferences.

Removing a Printer

Instructions for removing an existing printer from System Preferences.

Managing Printers via CUPS Web Interface

Adding a Printer

Steps to add a new printer via the CUPS web interface by entering the address.

Modifying Printers

Instructions on how to modify the settings of an existing printer in CUPS.

Removing Printers

Steps to remove an existing printer from the CUPS web interface.

Setting Default Printer Options

How to configure and save default printing options for a printer in CUPS.

Managing Printers from the Command Line

Troubleshooting Printer Issues

Related product manuals

Preview: SATO CL408

Preview: SATO CL408e/412e

SATO CL408e/412e

Preview: SATO CL4NX

Preview: SATO CL412e

Preview: SATO CL4NX Plus

SATO CL4NX Plus

Preview: SATO CL6NX

Preview: SATO CL608

Preview: SATO CL608e

Preview: SATO CL608e/CL612e

SATO CL608e/CL612e

Preview: SATO CT4-LX

Preview: SATO CG412DT