Need help?Do you have a question about the SATO CL608e and is the answer not in the manual?
Details specifications for PRINT, MEDIA, SENSING, and RIBBON for CL408e, CL412e, CL608e, CL612e models.
Provides instructions for unpacking the printer and identifying its components and accessories.
Detailed steps for loading labels, tags, and ribbon for CL608e and CL612e models.
Instructions for correctly loading the ribbon spool and feeding it through the print head.
Detailed steps for loading labels, tags, and ribbon for CL408e and CL412e models.
Instructions for correctly loading the ribbon spool and feeding it through the print head.
Explains the function of DIP switches (DSW1, DSW2, DSW3) for printer settings and modes.
Details DIP switch settings for Data Bits, Parity, Stop Bits, Baud Rate, and Protocol Selection.
Describes default switch and software settings and how to restore them.
Instructions for adjusting PITCH and OFFSET using front panel potentiometers.
Guide to entering configuration settings using the LCD panel and control keys.
Guidance on adjusting print darkness and print speed for optimal output quality.
Step-by-step instructions for cleaning these key printer components.
Procedure for user replacement of the print head for CL6XXe models.
Instructions for cleaning the print head and platen for CL408e and CL412e models.
Basic checks for printer power, error lights, and label/ribbon loading.
Common issues and checks for problems with parallel interface connectivity.
Guides for diagnosing issues with the serial interface connection and configuration.
To Next Page
General
